What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
They are making a number of good points relating to What Would Cause My Electric Water Heater to Stop Working? as a whole in this content in the next paragraphs.
Numerous contemporary residences take advantage of an electric water heater for their heater, as a result of its convenience as well as simplicity of use. Nonetheless, just like any other electrical home appliances, issues might emerge with its usage, unexpectedly. It can be truly discouraging to awaken to a cold shower instead of a hot one or having your bathroom with water that isn't warm enough or even as well hot. Whatever the situation might be, hot water heater troubles can be quite nerve-racking. Thankfully, we've made a listing of feasible remedies to your hot water heater concerns. There are a variety of factors that can cause many of these problems, it could be an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the primary power supply for safety. Whatever the trouble is, getting it fixed need to not posture way too much of a concern if you adhere to these actions:
Examine Your Power Supply:
As standard as this might appear, it is really needed. Without appropriate power, your water heater will not function. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, simply turn it off and on once more. Change any kind of damaged or worn-out fuse. Evaluate the appliance with power after these changes to see if it's currently functioning.
Inspect the Heating Element in the Water Heater:
If it's not a power trouble, after that attempt having a look at your heating element if it is still functioning. Examine each of your burner to make sure the problem isn't with any one of them. If any one of them is malfunctioning, replace that part and afterwards inspect whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to check the temperature level settings on your upper thermostat. Make certain the breaker is switched off before doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This need to aid heat up the water. Turn the breaker back on as well as check if the trouble has been dealt with.
Call A Specialist:
If after replacing all faulty components as well as resetting your temperature, the hot water heater still isn't working, you might need to contact a specialist plumber for an expert point of view. The issue with your heater could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of warm water needed in your home. Whatever the situation may be, a specialist plumber would assist resolve the trouble.
Final thought
Water heater issues are not constantly significant. Most of them are due to minor issues like a blown fuse or damaged heating element. Changing the defective components should suffice. However, if you are still not able to fix the problem, give a call to your local plumber to come to get it repaired.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
Hopefully you liked our excerpt about What Would Cause My Electric Water Heater to Stop Working?. Thank you so much for finding the time to read through our content. Sharing is nice. One never knows, you could be doing someone a favor. We take joy in reading our article about What Would Cause My Electric Water Heater to Stop Working?.
Or Book Technician Here
Report this page